TrustSeal Verified

IndiaMART Verified Exporter

Aluminum Bronze Rods

C86200 Manganese Bronze Rods

C86200 Manganese Bronze Rods

Approx. Rs 750 / Kilogram


The Manganese bronze copper casting alloy UNS C86200 consists primarily of copper, zinc, aluminium and manganese bronze. Manganese existing in UNS C86200 provides an attractive chocolate brown colour which is commonly used in architecture. The presence of lead in the alloy improves the longevity of the alloy.

Typical Uses:
Technical Specification:

SpecificationsDesignation
UNSC86200
ISOCuZn26Al4Fe3Mn3
JISCAC303

Chemical Composition:

ZnCuFeMnNiPbSn
Min/Max22-2860-662-42.5-51.0max0.2max0.2 max
Nominals256333.7---

Physical Properties:

Product PropertyUS Customary
Melting Point - Liquidus1725 F
Melting Point - Solidus1650 F
Density0.288 lb/in3 at 68 F
Specific Gravity7.97
Electrical Resistivity136.70 ohms-cmil/ft @ 68 F
Electrical Conductivity8 %IACS @ 68 F
Thermal Conductivity20.50 Btu · ft/(hr · ft2·°F)at 68F
Coefficient of Thermal Expansion120 ·10-6 per oF (68-392 F)
Specific Heat Capacity0.090 Btu/lb/°F at 68 F
Modulus of Elasticity in Tension15000 ksi
Magnetic Permeability*1.24

C67300 Manganese Bronze Rods

C67300 Manganese Bronze Rods

Approx. Rs 750 / Kilogram


The C67300 Manganese Bronze is high in strength alloy with good bearing qualities. The alloy maintains high impact resistance with good machinability by making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. It also resists squashing out under high loads and extreme wear applications.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67400
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.2558.0 - 63.00.50.40 - 3.02.0 - 3.50.250.50 - 1.50.3Rem
Nominals-60.5000-1.70002.7000-1.0000-34.1000

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingsSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
Machinability Rating70

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11 ·10-6 per oF (68-572 F)19.0 ·10-6 per oC (20-300 C)
Density.30 lb/in3 at 68 F8.3 gm/cm3 @ 20 C
Electrical Conductivity22 %IACS @ 68 F0.13 MegaSiemens/cm @ 20 C
Melting Point - Liquidus1605 F874 C
Modulas of Elasticity in Tension17000 ksi117200 MPa
Specific Gravity8.38.3
Thermal Conductivity55 Btu · ft/(hr · ft2·oF)at 68F95.0 W/m · oK at 20 C

C66800 Manganese Bronze

C66800 Manganese Bronze

Approx. Rs 750 / Kilogram

The Manganese Bronze C66800 alloy possess good hot and cold workability and forging ability. It is fabricated using the process of bending, coining, rawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
UNSC67300
UNSC67400
UNSC67420

Chemical Composition:

CuAlFePbMnNiSiSnZn
Min./Max.60.0-63.00.250.350.52.0-3.50.25.50-1.50.3Rem.
Nominal61.5---2.7-1--

Physical Properties:

Density0.300 lb/in3
Melting Range1690 – 1730 oF
Coefficient of Expansion(68 to 572oF) 11 ?in/in oF
Thermal Conductivity55 Btu/ft h oF
Electrical Conductivity21 % IACS
Electrical Resistivity54 ? (circ mil/ft)
Relative Magnetic Permeability<1.02
Coefficient of Friction0.15

Additional Information:

C67000 Manganese Bronze B

C67000 Manganese Bronze B

Approx. Rs 750 / Kilogram


The C67000 Manganese Bronze B is high in strength alloy that possesses hot and cold workability with good forging ability. The alloy is manufactured using the process of bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
ISOCuAl8Fe3
EuropeanCuAl8Fe3
BSIAS 106
JISC 6140

Physical Properties:

Product Property-
Melting Point - Liquidus°F1652
Density lb/cu in. at 68°F0.286
Specific Gravity7.92
Electrical Conductivity% IACS at 68°F22
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F57
Coefficient of Thermal Expansion 68-57210?6 per °F (68 – 572°F)11.9

C67300 Manganese Bronze

C67300 Manganese Bronze

Approx. Rs 750 / Kilogram


The C67300 Manganese Bronze is high in strength alloy with good bearing qualities. The alloy maintains high impact resistance with good machinability by making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. It also resists squashing out under high loads and extreme wear applications.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67400
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.2558.0 - 63.00.50.40 - 3.02.0 - 3.50.250.50 - 1.50.3Rem
Nominals-60.5000-1.70002.7000-1.0000-34.1000

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingsSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
Machinability Rating70

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11 ·10-6 per oF (68-572 F)19.0 ·10-6 per oC (20-300 C)
Density.30 lb/in3 at 68 F8.3 gm/cm3 @ 20 C
Electrical Conductivity22 %IACS @ 68 F0.13 MegaSiemens/cm @ 20 C
Melting Point - Liquidus1605 F874 C
Modulas of Elasticity in Tension17000 ksi117200 MPa
Specific Gravity8.38.3
Thermal Conductivity55 Btu · ft/(hr · ft2·oF)at 68F95.0 W/m · oK at 20 C

C67400 Manganese Bronze

C67400 Manganese Bronze

Approx. Rs 750 / Kg


The Manganese BronzeC67400alloy is manufactured using the process of bending, drawing, upsetting, and many other processes. The alloy is excellent on hot and cold workability and forges ability.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67300
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.50 - 2.057.0 - 60.00.350.52.0 - 3.50.250.50 - 1.50.3Rem
Nominals1.258.5--2.8-1-36.5

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
BrazingGood
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability100
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingNot Recommended
Seam WeldGood
SolderingFair
Spot WeldGood

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11.0 ·10-6 per oF (68-572 F)19.8 ·10-6 per oC (20-300 C)
Density0.292 lb/in3 at 68 F8.08 gm/cm3 @ 20 C
Electrical Conductivity23 %IACS @ 68 F0.135 MegaSiemens/cm @ 20 C
Electrical Resistivity45.1 ohms-cmil/ft @ 68 F7.5 microhm-cm @ 20 C
Melting Point - Liquidus1625 F885 C
Melting Point - Solidus1590 F866 C
Modulus of Elasticity in Tension16000 ksi110000 Mpa
Modulus of Rigidity6000 ksi41370 Mpa
Specific Gravity8.088.08
Specific Heat Capacity0.09 Btu/lb/oF at 68 F377.1 J/kg/ · oK at 293 K
Thermal Conductivity58.0 Btu · ft/(hr · ft2·oF)at 68F100.4 W/m · oK at 20 C

C67500 Manganese Bronze

C67500 Manganese Bronze

Approx. Rs 750 / Kilogram


Alloy C67500 Manganese Bronze is a wrought alloy with additions of iron, tin and manganese to increase the strength and corrosion resistance. It can be worked to increase the strength and can be available in the half hard and fully hard condition. It possesses hot working properties and can be die forged into valves, connectors and other components for military applications. It can also be hot-headed or upset forged for manufacturing fasteners.

Typical Uses:
Chemical Composition:

AlCuFePbMnSiZn
Min/Max0.2557.0 - 60.00.80 - 2.00.20.05 - 0.500.50 - 1.5Rem
Nominals-58.50001.4000-0.10001.000039.0000

Specifications:

End ProductSpecification
BarASTM B138, SAE J461, J463
Bar, ForgingASTM B124
BoltsASTM F468
Forgings, DieASTM B283, SAE J463, J461
NutsASTM F467
RodASTM B138, SAE J463, J461
Rod, ForgingASTM B124
ScrewsASTM F468
ShapesASTM B138, SAE J461, J463
Shapes, ForgingASTM B124
StudsASTM F468

Fabrication:

Joining TechniqueSuitability
BrazingExcellent
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability80
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingGood
Seam WeldFair
SolderingExcellent
Spot WeldGood

C67600 Manganese Bronze

C67600 Manganese Bronze

Approx. Rs 750 / Kilogram


The alloy possesses excellent hot and cold workability good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
Chemical Composition:

CuFePbMnSnZn
Min/Max57.0 - 60.00.40 - 1.30.50 - 1.00.05 - 0.500.50 - 1.5Rem
Nominals58.50.80.70.27138.7

Specifications:

End ProductSpecification
Brazing Filler MetalAWS A5.8
Forgings, DieASTM B283

Fabrication:

Joining TechniqueSuitability
BrazingExcellent
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Forgeability80
Gas Shielded Arc WeldingFair
Machinability Rating60
Oxyacetylene WeldingGood
SolderingExcellent
Spot WeldGood

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11.8 ·10-6 per oF (68-572 F)20.4 ·10-6 per oC (20-300 C)
Density0.302 lb/in3 at 68 F8.36 gm/cm3 @ 20 C
Electrical Conductivity24 %IACS @ 68 F0.139 MegaSiemens/cm @ 20 C
Melting Point - Liquidus1630 F890 C
Melting Point - Solidus1590 F865 C
Modulus of Elasticity in Tension15000 ksi103400 Mpa
Modulus of Rigidity5600 ksi38600 Mpa
Thermal Conductivity61.0.0 Btu · ft/(hr · ft2·oF)at 68F105.7 W/m · oK at 20 C

C86200 Manganese Bronze

C86200 Manganese Bronze

Approx. Rs 750 / Kilogram


The Manganese bronze copper casting alloy UNS C86200 consists primarily of copper, zinc, aluminium and manganese bronze. Manganese existing in UNS C86200 provides an attractive chocolate brown colour which is commonly used in architecture. The presence of lead in the alloy improves the longevity of the alloy.

Typical Uses:
Technical Specification:

SpecificationsDesignation
UNSC86200
ISOCuZn26Al4Fe3Mn3
JISCAC303

Chemical Composition:

ZnCuFeMnNiPbSn
Min/Max22-2860-662-42.5-51.0max0.2max0.2 max
Nominals256333.7---

Physical Properties:

Product PropertyUS Customary
Melting Point - Liquidus1725 F
Melting Point - Solidus1650 F
Density0.288 lb/in3 at 68 F
Specific Gravity7.97
Electrical Resistivity136.70 ohms-cmil/ft @ 68 F
Electrical Conductivity8 %IACS @ 68 F
Thermal Conductivity20.50 Btu · ft/(hr · ft2·°F)at 68F
Coefficient of Thermal Expansion120 ·10-6 per oF (68-392 F)
Specific Heat Capacity0.090 Btu/lb/°F at 68 F
Modulus of Elasticity in Tension15000 ksi
Magnetic Permeability*1.24

C66800 Manganese Bronze Rods

C66800 Manganese Bronze Rods

Approx. Rs 750 / Kilogram


The Manganese Bronze C66800 alloy possess good hot and cold workability and forging ability. It is fabricated using the process of bending, coining, rawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
UNSC67300
UNSC67400
UNSC67420

Chemical Composition:

CuAlFePbMnNiSiSnZn
Min./Max.60.0-63.00.250.350.52.0-3.50.25.50-1.50.3Rem.
Nominal61.5---2.7-1--

Physical Properties:

Density0.300 lb/in3
Melting Range1690 – 1730 oF
Coefficient of Expansion(68 to 572oF) 11 ?in/in oF
Thermal Conductivity55 Btu/ft h oF
Electrical Conductivity21 % IACS
Electrical Resistivity54 ? (circ mil/ft)
Relative Magnetic Permeability<1.02
Coefficient of Friction0.15

C67500 Manganese Bronze Rods

C67500 Manganese Bronze Rods

Approx. Rs 750 / Kilogram


Alloy C67500 Manganese Bronze is a wrought alloy with additions of iron, tin and manganese to increase the strength and corrosion resistance. It can be worked to increase the strength and can be available in the half hard and fully hard condition. It possesses hot working properties and can be die forged into valves, connectors and other components for military applications. It can also be hot-headed or upset forged for manufacturing fasteners.

Typical Uses:
Chemical Composition:

AlCuFePbMnSiZn
Min/Max0.2557.0 - 60.00.80 - 2.00.20.05 - 0.500.50 - 1.5Rem
Nominals-58.50001.4000-0.10001.000039.0000

Specifications:

End ProductSpecification
BarASTM B138, SAE J461, J463
Bar, ForgingASTM B124
BoltsASTM F468
Forgings, DieASTM B283, SAE J463, J461
NutsASTM F467
RodASTM B138, SAE J463, J461
Rod, ForgingASTM B124
ScrewsASTM F468
ShapesASTM B138, SAE J461, J463
Shapes, ForgingASTM B124
StudsASTM F468

Fabrication:

Joining TechniqueSuitability
BrazingExcellent
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability80
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingGood
Seam WeldFair
SolderingExcellent
Spot WeldGood

C67400 Manganese Bronze Rods

C67400 Manganese Bronze Rods

Approx. Rs 750 / Kg


The Manganese BronzeC67400alloy is manufactured using the process of bending, drawing, upsetting, and many other processes. The alloy is excellent on hot and cold workability and forges ability.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67300
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.50 - 2.057.0 - 60.00.350.52.0 - 3.50.250.50 - 1.50.3Rem
Nominals1.258.5--2.8-1-36.5

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
BrazingGood
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability100
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingNot Recommended
Seam WeldGood
SolderingFair
Spot WeldGood

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11.0 ·10-6 per oF (68-572 F)19.8 ·10-6 per oC (20-300 C)
Density0.292 lb/in3 at 68 F8.08 gm/cm3 @ 20 C
Electrical Conductivity23 %IACS @ 68 F0.135 MegaSiemens/cm @ 20 C
Electrical Resistivity45.1 ohms-cmil/ft @ 68 F7.5 microhm-cm @ 20 C
Melting Point - Liquidus1625 F885 C
Melting Point - Solidus1590 F866 C
Modulus of Elasticity in Tension16000 ksi110000 Mpa
Modulus of Rigidity6000 ksi41370 Mpa
Specific Gravity8.088.08
Specific Heat Capacity0.09 Btu/lb/oF at 68 F377.1 J/kg/ · oK at 293 K
Thermal Conductivity58.0 Btu · ft/(hr · ft2·oF)at 68F100.4 W/m · oK at 20 C

C67000 Manganese Bronze B Rods

C67000 Manganese Bronze B Rods

Approx. Rs 750 / Kilogram


The C67000 Manganese Bronze B is high in strength alloy that possesses hot and cold workability with good forging ability. The alloy is manufactured using the process of bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
Technical Specifications:

SpecificationsDesignation
ISOCuAl8Fe3
EuropeanCuAl8Fe3
BSIAS 106
JISC 6140

Physical Properties:

Product Property-
Melting Point - Liquidus°F1652
Density lb/cu in. at 68°F0.286
Specific Gravity7.92
Electrical Conductivity% IACS at 68°F22
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F57
Coefficient of Thermal Expansion 68-57210?6 per °F (68 – 572°F)11.9
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Aluminum Bronze Rods ?

    country-ico

    We will contact you soon !

    Pratik Kabra

    (CEO)

    Shree Extrusions Limited

    Jamnagar, Gujarat, India

    More Categories

    View All Categories »
    Send SMS
    Get Callback