Shree Extrusions Limited

Manganese Bronze

C86200 Manganese Bronze Rods

Rs 480 / Kilogram
C86200 Manganese Bronze Rods
  • Minimum Order Quantity 1000 Kilogram
  • Single Piece Length 3 meter
  • Usage Manufacturing
  • Material Bronze
  • Brand Shree Extrusion Limited
  • Grade C86200
The Manganese bronze copper casting alloy UNS C86200 consists primarily of copper, zinc, aluminium and manganese bronze. Manganese existing in UNS C86200 provides an attractive chocolate brown colour which is commonly used in architecture. The presence of lead in the alloy improves the longevity of the alloy.

Typical Uses:
  • Builders: Hardware Brackets, Structural Parts
  • Fasteners: Screw Down Nuts
  • Industrial: Struts, Gears, Valve Stems, Bushings, Cams, Wear Rings for Pressing Dies for Wood Pulp Industry, High Strength Machine Parts, Hooks, Frames, Shafts, Marine Racing Propellers, Worm Gears, Pressing Dies for Wood Pulp
  • Marine: Rudders, Marine Castings, Boat Parts, Clamps

Technical Specification:

SpecificationsDesignation
UNSC86200
ISOCuZn26Al4Fe3Mn3
JISCAC303

Chemical Composition:

ZnCuFeMnNiPbSn
Min/Max22-2860-662-42.5-51.0max0.2max0.2 max
Nominals256333.7---

Physical Properties:

Product PropertyUS Customary
Melting Point - Liquidus1725 F
Melting Point - Solidus1650 F
Density0.288 lb/in3 at 68 F
Specific Gravity7.97
Electrical Resistivity136.70 ohms-cmil/ft @ 68 F
Electrical Conductivity8 %IACS @ 68 F
Thermal Conductivity20.50 Btu · ft/(hr · ft2·°F)at 68F
Coefficient of Thermal Expansion120 ·10-6 per oF (68-392 F)
Specific Heat Capacity0.090 Btu/lb/°F at 68 F
Modulus of Elasticity in Tension15000 ksi
Magnetic Permeability*1.24

C67300 Manganese Bronze Rods

Rs 480 / Kilogram
C67300 Manganese Bronze Rods
  • Minimum Order Quantity 1000 Kilogram
  • Usage Manufacturing
  • Material Bronze
  • Brand Shree Extrusion Limited
  • Grade C67300
The C67300 Manganese Bronze is high in strength alloy with good bearing qualities. The alloy maintains high impact resistance with good machinability by making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. It also resists squashing out under high loads and extreme wear applications.

Typical Uses:
  • Fasteners: Fasteners, Lead Screw Nuts
  • Industrial: Gears and Cams, Wear Plates, Bushings, Seal Rings, Idler Pins, Piston Heads, Brearing Pins, Thrust Bearings, Sleeve Bearings, Propeller Shafts, Shaft Bushings, Clutch Bearings, Drive Shafts, Spindles, Pump Parts, Bearings
  • Marine: Hardware, Valve Seats
  • Other: Connecting Rods

Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67400
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.2558.0 - 63.00.50.40 - 3.02.0 - 3.50.250.50 - 1.50.3Rem
Nominals-60.5000-1.70002.7000-1.0000-34.1000

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingsSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
Machinability Rating70

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11 ·10-6 per oF (68-572 F)19.0 ·10-6 per oC (20-300 C)
Density.30 lb/in3 at 68 F8.3 gm/cm3 @ 20 C
Electrical Conductivity22 %IACS @ 68 F0.13 MegaSiemens/cm @ 20 C
Melting Point - Liquidus1605 F874 C
Modulas of Elasticity in Tension17000 ksi117200 MPa
Specific Gravity8.38.3
Thermal Conductivity55 Btu · ft/(hr · ft2·oF)at 68F95.0 W/m · oK at 20 C

C66800 Manganese Bronze Rods

Rs 480 / Kilogram
C66800 Manganese Bronze Rods
  • Minimum Order Quantity 1000 Kilogram
  • Material Bronze
  • Brand Shree Extrusion Limited
  • Grade C66800
The Manganese Bronze C66800 alloy possess good hot and cold workability and forging ability. It is fabricated using the process of bending, coining, rawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
  • Industrial: Gears, Sealing Rings, Thrust Bearings, Bushings, Cams, Spindles, Bearings, Idler Pins, Connecting Rods, Drive Shafts, Valve Seats, Sleeve Bearings, Piston Heads.
  • Marine: Pump Parts, Hardware, High Strength

Technical Specifications:

SpecificationsDesignation
UNSC67300
UNSC67400
UNSC67420

Chemical Composition:

CuAlFePbMnNiSiSnZn
Min./Max.60.0-63.00.250.350.52.0-3.50.25.50-1.50.3Rem.
Nominal61.5---2.7-1--

Physical Properties:

Density0.300 lb/in3
Melting Range1690 – 1730 oF
Coefficient of Expansion(68 to 572oF) 11 ?in/in oF
Thermal Conductivity55 Btu/ft h oF
Electrical Conductivity21 % IACS
Electrical Resistivity54 ? (circ mil/ft)
Relative Magnetic Permeability<1.02
Coefficient of Friction0.15

C67500 Manganese Bronze Rods

Rs 480 / Kilogram
C67500 Manganese Bronze Rods
  • Minimum Order Quantity 1000 Kilogram
  • Material Bronze
  • Brand Shree Extrusion Limited
  • Grade C67500
Alloy C67500 Manganese Bronze is a wrought alloy with additions of iron, tin and manganese to increase the strength and corrosion resistance. It can be worked to increase the strength and can be available in the half hard and fully hard condition. It possesses hot working properties and can be die forged into valves, connectors and other components for military applications. It can also be hot-headed or upset forged for manufacturing fasteners.

Typical Uses:
  • Automotive: Clutch Disks, Shafting, Pump Rods
  • Fasteners: bolts
  • Industrial: Valve Bodies, Balls, Valve Stems, Bushings, Aircraft Parts
  • Marine: hardware

Chemical Composition:

AlCuFePbMnSiZn
Min/Max0.2557.0 - 60.00.80 - 2.00.20.05 - 0.500.50 - 1.5Rem
Nominals-58.50001.4000-0.10001.000039.0000

Specifications:

End ProductSpecification
BarASTM B138, SAE J461, J463
Bar, ForgingASTM B124
BoltsASTM F468
Forgings, DieASTM B283, SAE J463, J461
NutsASTM F467
RodASTM B138, SAE J463, J461
Rod, ForgingASTM B124
ScrewsASTM F468
ShapesASTM B138, SAE J461, J463
Shapes, ForgingASTM B124
StudsASTM F468

Fabrication:

Joining TechniqueSuitability
BrazingExcellent
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability80
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingGood
Seam WeldFair
SolderingExcellent
Spot WeldGood

C67400 Manganese Bronze Rods

Rs 480 / Kilogram
C67400 Manganese Bronze Rods
  • Minimum Order Quantity 1000 Kilogram
  • Material Bronze
  • Brand Shree Extrusion Limited
  • Grade C67400
The Manganese BronzeC67400alloy is manufactured using the process of bending, drawing, upsetting, and many other processes. The alloy is excellent on hot and cold workability and forges ability.

Typical Uses:
  • Industrial: Bushings, Shafts, Cams, Chain Guides, Wear Plates, Gears, Food Conveyor Chain
  • Other: Connecting Rods

Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67300
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.50 - 2.057.0 - 60.00.350.52.0 - 3.50.250.50 - 1.50.3Rem
Nominals1.258.5--2.8-1-36.5

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
BrazingGood
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability100
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingNot Recommended
Seam WeldGood
SolderingFair
Spot WeldGood

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11.0 ·10-6 per oF (68-572 F)19.8 ·10-6 per oC (20-300 C)
Density0.292 lb/in3 at 68 F8.08 gm/cm3 @ 20 C
Electrical Conductivity23 %IACS @ 68 F0.135 MegaSiemens/cm @ 20 C
Electrical Resistivity45.1 ohms-cmil/ft @ 68 F7.5 microhm-cm @ 20 C
Melting Point - Liquidus1625 F885 C
Melting Point - Solidus1590 F866 C
Modulus of Elasticity in Tension16000 ksi110000 Mpa
Modulus of Rigidity6000 ksi41370 Mpa
Specific Gravity8.088.08
Specific Heat Capacity0.09 Btu/lb/oF at 68 F377.1 J/kg/ · oK at 293 K
Thermal Conductivity58.0 Btu · ft/(hr · ft2·oF)at 68F100.4 W/m · oK at 20 C

C66800 Manganese Bronze

Rs 480 / Kilogram
C66800 Manganese Bronze
  • Minimum Order Quantity: 1000 Kilogram
The Manganese Bronze C66800 alloy possess good hot and cold workability and forging ability. It is fabricated using the process of bending, coining, rawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
  • Industrial: Gears, Sealing Rings, Thrust Bearings, Bushings, Cams, Spindles, Bearings, Idler Pins, Connecting Rods, Drive Shafts, Valve Seats, Sleeve Bearings, Piston Heads.
  • Marine: Pump Parts, Hardware, High Strength

Technical Specifications:

SpecificationsDesignation
UNSC67300
UNSC67400
UNSC67420

Chemical Composition:

CuAlFePbMnNiSiSnZn
Min./Max.60.0-63.00.250.350.52.0-3.50.25.50-1.50.3Rem.
Nominal61.5---2.7-1--

Physical Properties:

Density0.300 lb/in3
Melting Range1690 – 1730 oF
Coefficient of Expansion(68 to 572oF) 11 ?in/in oF
Thermal Conductivity55 Btu/ft h oF
Electrical Conductivity21 % IACS
Electrical Resistivity54 ? (circ mil/ft)
Relative Magnetic Permeability<1.02
Coefficient of Friction0.15

C67000 Manganese Bronze B

Rs 480 / Kilogram
C67000 Manganese Bronze B
  • Minimum Order Quantity 1000 Kilogram
  • Brand Shree Extrusion Limited
  • Material Bronze
The C67000 Manganese Bronze B is high in strength alloy that possesses hot and cold workability with good forging ability. The alloy is manufactured using the process of bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
  • Industrial: Forgings, Corrosion Resistance, Wearability , Fatigue Resistance , High Strength .

Technical Specifications:

SpecificationsDesignation
ISOCuAl8Fe3
EuropeanCuAl8Fe3
BSIAS 106
JISC 6140

Physical Properties:

Product Property-
Melting Point - Liquidus°F1652
Density lb/cu in. at 68°F0.286
Specific Gravity7.92
Electrical Conductivity% IACS at 68°F22
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F57
Coefficient of Thermal Expansion 68-57210?6 per °F (68 – 572°F)11.9

C67300 Manganese Bronze

Rs 480 / Kilogram
C67300 Manganese Bronze
  • Minimum Order Quantity 1000 Kilogram
  • Brand Shree Extrusion Limited
  • Material Bronze
The C67300 Manganese Bronze is high in strength alloy with good bearing qualities. The alloy maintains high impact resistance with good machinability by making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. It also resists squashing out under high loads and extreme wear applications.

Typical Uses:
  • Fasteners: Fasteners, Lead Screw Nuts
  • Industrial: Gears and Cams, Wear Plates, Bushings, Seal Rings, Idler Pins, Piston Heads, Brearing Pins, Thrust Bearings, Sleeve Bearings, Propeller Shafts, Shaft Bushings, Clutch Bearings, Drive Shafts, Spindles, Pump Parts, Bearings
  • Marine: Hardware, Valve Seats
  • Other: Connecting Rods

Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67400
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.2558.0 - 63.00.50.40 - 3.02.0 - 3.50.250.50 - 1.50.3Rem
Nominals-60.5000-1.70002.7000-1.0000-34.1000

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingsSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
Machinability Rating70

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11 ·10-6 per oF (68-572 F)19.0 ·10-6 per oC (20-300 C)
Density.30 lb/in3 at 68 F8.3 gm/cm3 @ 20 C
Electrical Conductivity22 %IACS @ 68 F0.13 MegaSiemens/cm @ 20 C
Melting Point - Liquidus1605 F874 C
Modulas of Elasticity in Tension17000 ksi117200 MPa
Specific Gravity8.38.3
Thermal Conductivity55 Btu · ft/(hr · ft2·oF)at 68F95.0 W/m · oK at 20 C

C67400 Manganese Bronze

Rs 480 / Kilogram
C67400 Manganese Bronze
  • Minimum Order Quantity 1000 Kilogram
  • Brand Shree Extrusion Limited
  • Material Bronze
The Manganese BronzeC67400alloy is manufactured using the process of bending, drawing, upsetting, and many other processes. The alloy is excellent on hot and cold workability and forges ability.

Typical Uses:
  • Industrial: Bushings, Shafts, Cams, Chain Guides, Wear Plates, Gears, Food Conveyor Chain
  • Other: Connecting Rods

Technical Specifications:

SpecificationsDesignation
UNSC66800
UNSC67300
UNSC67420

Chemical Composition:

AlCuFePbMnNiSiSnZn
Min/Max0.50 - 2.057.0 - 60.00.350.52.0 - 3.50.250.50 - 1.50.3Rem
Nominals1.258.5--2.8-1-36.5

Specifications:

End ProductSpecification
BarSAE J461, J463
ForgingSAE J461, J463
RodSAE J463, J461
ShapesSAE J463, J461

Fabrication:

Joining TechniqueSuitability
BrazingGood
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability100
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingNot Recommended
Seam WeldGood
SolderingFair
Spot WeldGood

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11.0 ·10-6 per oF (68-572 F)19.8 ·10-6 per oC (20-300 C)
Density0.292 lb/in3 at 68 F8.08 gm/cm3 @ 20 C
Electrical Conductivity23 %IACS @ 68 F0.135 MegaSiemens/cm @ 20 C
Electrical Resistivity45.1 ohms-cmil/ft @ 68 F7.5 microhm-cm @ 20 C
Melting Point - Liquidus1625 F885 C
Melting Point - Solidus1590 F866 C
Modulus of Elasticity in Tension16000 ksi110000 Mpa
Modulus of Rigidity6000 ksi41370 Mpa
Specific Gravity8.088.08
Specific Heat Capacity0.09 Btu/lb/oF at 68 F377.1 J/kg/ · oK at 293 K
Thermal Conductivity58.0 Btu · ft/(hr · ft2·oF)at 68F100.4 W/m · oK at 20 C

C67500 Manganese Bronze

Rs 480 / Kilogram
C67500 Manganese Bronze
  • Minimum Order Quantity 1000 Kilogram
  • Brand Shree Extrusion Limited
  • Material Bronze
Alloy C67500 Manganese Bronze is a wrought alloy with additions of iron, tin and manganese to increase the strength and corrosion resistance. It can be worked to increase the strength and can be available in the half hard and fully hard condition. It possesses hot working properties and can be die forged into valves, connectors and other components for military applications. It can also be hot-headed or upset forged for manufacturing fasteners.

Typical Uses:
  • Automotive: Clutch Disks, Shafting, Pump Rods
  • Fasteners: bolts
  • Industrial: Valve Bodies, Balls, Valve Stems, Bushings, Aircraft Parts
  • Marine: hardware

Chemical Composition:

AlCuFePbMnSiZn
Min/Max0.2557.0 - 60.00.80 - 2.00.20.05 - 0.500.50 - 1.5Rem
Nominals-58.50001.4000-0.10001.000039.0000

Specifications:

End ProductSpecification
BarASTM B138, SAE J461, J463
Bar, ForgingASTM B124
BoltsASTM F468
Forgings, DieASTM B283, SAE J463, J461
NutsASTM F467
RodASTM B138, SAE J463, J461
Rod, ForgingASTM B124
ScrewsASTM F468
ShapesASTM B138, SAE J461, J463
Shapes, ForgingASTM B124
StudsASTM F468

Fabrication:

Joining TechniqueSuitability
BrazingExcellent
Butt WeldGood
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Coated Metal Arc WeldingNot Recommended
Forgeability80
Gas Shielded Arc WeldingFair
Machinability Rating30
Oxyacetylene WeldingGood
Seam WeldFair
SolderingExcellent
Spot WeldGood

C67600 Manganese Bronze

Rs 480 / Kilogram
C67600 Manganese Bronze
  • Minimum Order Quantity 1000 Kilogram
  • Brand Shree Extrusion Limited
  • Material Bronze
The alloy possesses excellent hot and cold workability good forge ability. Fabricated by bending, coining, coppersmith, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
  • Industrial: Gate Valve Stems, Welding Rod, Valve Balls

Chemical Composition:

CuFePbMnSnZn
Min/Max57.0 - 60.00.40 - 1.30.50 - 1.00.05 - 0.500.50 - 1.5Rem
Nominals58.50.80.70.27138.7

Specifications:

End ProductSpecification
Brazing Filler MetalAWS A5.8
Forgings, DieASTM B283

Fabrication:

Joining TechniqueSuitability
BrazingExcellent
Capacity for Being Cold WorkedPoor
Capacity for Being Hot FormedExcellent
Forgeability80
Gas Shielded Arc WeldingFair
Machinability Rating60
Oxyacetylene WeldingGood
SolderingExcellent
Spot WeldGood

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11.8 ·10-6 per oF (68-572 F)20.4 ·10-6 per oC (20-300 C)
Density0.302 lb/in3 at 68 F8.36 gm/cm3 @ 20 C
Electrical Conductivity24 %IACS @ 68 F0.139 MegaSiemens/cm @ 20 C
Melting Point - Liquidus1630 F890 C
Melting Point - Solidus1590 F865 C
Modulus of Elasticity in Tension15000 ksi103400 Mpa
Modulus of Rigidity5600 ksi38600 Mpa
Thermal Conductivity61.0.0 Btu · ft/(hr · ft2·oF)at 68F105.7 W/m · oK at 20 C

C86200 Manganese Bronze

Rs 480 / Kilogram
C86200 Manganese Bronze
  • Minimum Order Quantity 1000 Kilogram
  • Brand Shree Extrusion Limited
  • Material Bronze
The Manganese bronze copper casting alloy UNS C86200 consists primarily of copper, zinc, aluminium and manganese bronze. Manganese existing in UNS C86200 provides an attractive chocolate brown colour which is commonly used in architecture. The presence of lead in the alloy improves the longevity of the alloy.

Typical Uses:
  • Builders: Hardware Brackets, Structural Parts
  • Fasteners: Screw Down Nuts
  • Industrial: Struts, Gears, Valve Stems, Bushings, Cams, Wear Rings for Pressing Dies for Wood Pulp Industry, High Strength Machine Parts, Hooks, Frames, Shafts, Marine Racing Propellers, Worm Gears, Pressing Dies for Wood Pulp
  • Marine: Rudders, Marine Castings, Boat Parts, Clamps

Technical Specification:

SpecificationsDesignation
UNSC86200
ISOCuZn26Al4Fe3Mn3
JISCAC303

Chemical Composition:

ZnCuFeMnNiPbSn
Min/Max22-2860-662-42.5-51.0max0.2max0.2 max
Nominals256333.7---

Physical Properties:

Product PropertyUS Customary
Melting Point - Liquidus1725 F
Melting Point - Solidus1650 F
Density0.288 lb/in3 at 68 F
Specific Gravity7.97
Electrical Resistivity136.70 ohms-cmil/ft @ 68 F
Electrical Conductivity8 %IACS @ 68 F
Thermal Conductivity20.50 Btu · ft/(hr · ft2·°F)at 68F
Coefficient of Thermal Expansion120 ·10-6 per oF (68-392 F)
Specific Heat Capacity0.090 Btu/lb/°F at 68 F
Modulus of Elasticity in Tension15000 ksi
Magnetic Permeability*1.24

C67000 Manganese Bronze B Rods

Rs 480 / Kilogram
C67000 Manganese Bronze B Rods
  • Minimum Order Quantity 1000 Kilogram
  • Brand Shree Extrusion Limited
  • Usage Manufacturing
  • Material Bronze
The C67000 Manganese Bronze B is high in strength alloy that possesses hot and cold workability with good forging ability. The alloy is manufactured using the process of bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:
  • Industrial: Forgings, Corrosion Resistance, Wearability , Fatigue Resistance , High Strength .

Technical Specifications:

SpecificationsDesignation
ISOCuAl8Fe3
EuropeanCuAl8Fe3
BSIAS 106
JISC 6140

Physical Properties:

Product Property-
Melting Point - Liquidus°F1652
Density lb/cu in. at 68°F0.286
Specific Gravity7.92
Electrical Conductivity% IACS at 68°F22
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F57
Coefficient of Thermal Expansion 68-57210?6 per °F (68 – 572°F)11.9

Browse more categories

Industrial Applications

Industrial Applications

Manganese Bronze

Manganese Bronze

Copper Alloy Tubes

Copper Alloy Tubes

Brass Insert

Brass Insert

x

Get Best Deals for Manganese Bronze

country-flag
x

Provide Us More Details

Purpose of Requirement:

Reselling End Use Raw Material

x

Product

Call Us Get Best Price