TrustSeal Verified

IndiaMART Verified Exporter

Brass Brazing Rod

High Tensile Brass Rod

Approx. Rs 580 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • I Deal In: New Only
  • Rod Length: 3-3.6m
  • Brand: Shree Extrusions
  • Material: Brass
  • Country of Origin: Made in India
  • Thickness: 0.1-6mm

We are one of the leading manufacturer and suppliers of  High Tensile Brass Rod with the using of a high quality of material. we obligated to meet the industrial requirements.

BS:1001, HT12472, IS:320 l & ll

Brass Rods C35200

Brass Rods C35200
  • Brass Rods C35200
  • Brass Rods C35200
  • Brass Rods C35200

Approx. Rs 550 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Material Grade: C35200
  • Country of Origin: Made in India
  • Brand: Shree Extrusions
  • Thickness: 0.1-6.5 mm
  • Diameter: 0.5-10mm

We are one of the leading manufacturer and suppliers of  Brass Rods C35200 with the using of a high quality of material. We obligated to match the industrial requirement.

Brass Rod C36000

Brass Rod C36000
  • Brass Rod C36000
  • Brass Rod C36000
  • Brass Rod C36000

Approx. Rs 550 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Material Grade: C36000
  • Country of Origin: Made in India
  • Brand: Shree Extrusions
  • Thickness: 0.1-6.5 mm
  • Specific Gravity: 8.44

We are one of the leading manufacturer and suppliers of  Brass Rod C36000 with the using of a high quality of material. We obligated to match the industrial requirement.

C69430 Silicon Red Brass Rods

Approx. Rs 580 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Material Grade: IS319
  • Shape: Round
  • Usage/Application: Industrial
  • Size: 10 TO 200
  • Rod Length: 2 TO 3 M
  • Brand: SEL
  • Material: Silicon Brass
  • Country of Origin: Made in India
  • Thickness: 0.1-7mm, 0.1-5.5mm
  • Grade: C69430

The silicon red brass is specified for underground service lines since it offers great corrosion resistance to all types of potable water and has moderate strength and good retention of spring properties.

Applications:
  • Industrial Applications: Valves Stems

Chemical Composition:

AsCuFePbSiZn
Min/Max0.03 - 0.0680.0 - 83.00.20.33.5 - 4.5Rem
Nominals0.040081.5000--4.000014.5000

Applicable Specifications:

ProductSpecification
RodASTM B371

Fabrication Properties:

Joining TechniqueSuitability
BrazingExcellent
Butt WeldGood
Capacity for Being Cold WorkedGood
Capacity for Being Hot Formed80
Coated Metal Arc WeldingGood
Forgeability Rating80
Gas Shielded Arc WeldingGood
Machinability Rating30
Oxyacetylene WeldingGood
Seam WeldGood
SolderingExcellent
Spot WeldGood

Physical Properties:

Product PropertyUS CustomaryMetric
Coefficient of Thermal Expansion11.2 ·10-6 per oF (68-572 F)20.2 ·10-6 per oC (20-300 C)
Density0.26 lb/in3 at 68 F8.19 gm/cm3 @ 20 C
Electrical Conductivity6 %IACS @ 68 F0.036 MegaSiemens/cm @ 20 C
Electrical Resistivity167.0 ohms-cmil/ft @ 68 F27.76 microhm-cm @ 20 C
Melting Point - Liquidus1685 F918 C
Melting Point - Solidus1510 F819 C
Modulus of Elasticity in Tension16000 ksi110000 Mpa
Specific Gravity8.198.19
Specific Heat Capacity0.09 Btu/lb/oF at 68 F377.1 J/kg · oK at 293 K
Thermal Conductivity15.0 Btu · ft/(hr · ft2·oF)at 68F26.0 W/m · oK at 20 C

Additional Information:
  • Item Code: C69430
  • Production Capacity: 100 TON
  • Delivery Time: 3-4 WEEK
  • Packaging Details: BOX

Riveting Brass Hollow Rods

Riveting Brass Hollow Rods
  • Riveting Brass Hollow Rods
  • Riveting Brass Hollow Rods
  • Riveting Brass Hollow Rods

Approx. Rs 580 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Shape: Round
  • Color: Yellow
  • Usage/Application: Industrial
  • Material: Brass
  • Hollow Sections: Circular
  • Brand: Shree Extrusion Limited
  • Country of Origin: Made in India

We are one of the leading manufacturer and suppliers of Riveting Brass Rod with the using of a high quality of material. We are able to meet the industrial norms and standards regarding requirements.

Brass Extrusion Section

Approx. Rs 580 / Kg

  • Minimum Order Quantity: 250 Kg
  • Grade: C26000
  • Material: Brass
  • Glass Thickness: 4 mm Min and As per customer Drawing
  • Brand: SEL
  • Size: 10 to 100
  • Color: Yellow
  • Country of Origin: Made in India

We are one of the leading manufacturer and suppliers of Brass Section. Under the guidance of our experienced professionals, this profile is manufactured using supreme quality raw material and modern technology. Our offered profile is appreciated for its rust proof feature. Provided profile is checked by our quality experts to provide defect free range to our clients. Further, our clients can avail this profile at cost-effective prices.


Industrial Application:-

Used in locks and safety equipments, auto parts, engineering industries

Additional Information:
  • Item Code: BRASSEXTRUS
  • Production Capacity: 100 ton
  • Delivery Time: 5-6 Weeks
  • Packaging Details: Woodencase OR as per customer requirement

Free Cutting Brass Hollow Rods

Free Cutting Brass Hollow Rods
  • Free Cutting Brass Hollow Rods
  • Free Cutting Brass Hollow Rods
  • Free Cutting Brass Hollow Rods

Approx. Rs 550 / Kg

  • Minimum Order Quantity: 1000 Kg
  • Rod Length: 3 meter
  • Shape: Round
  • Color: Yellow
  • Usage/Application: Industrial
  • Brand: Shree Extrusion Limited
  • Country of Origin: Made in India

We are one of the leading manufacturer and suppliers of Free-Cutting Brass Rod with the using of a high quality of material. We obligated to match the industrial requirements in a certain time.

BS249, IS: 319 Gr. l & ll, IS: 8364 Gr. l & ll, BS: 2874 CZ121Pb3, CuZn39Pb3

Brass Hollow Rods

Brass Hollow Rods
  • Brass Hollow Rods
  • Brass Hollow Rods
  • Brass Hollow Rods

Approx. Rs 550 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Shape: Round
  • Color: Yellow
  • Usage/Application: Industrial
  • Brand: Shree Extrusions
  • Country of Origin: Made in India
  • CNC turning work range: 0.5mm-300mm*750mm
  • CNC milling work range: 510mm*1020mm*500mm

Brass hollow rods offers significant economic advantages, by way of removing the need for drilling operations, and very often the boring out of the parts.

Numerous applications, and in particular for the making of taps and valves (plumbing-heating industry), use many components that require the boring out of parts.

Industrial Application:-

Widely uses in the automobile industry for synchronizer range and bearing cage and brass retainer.

Lead Free Brass Hollow Rods

Lead Free Brass Hollow Rods
  • Lead Free Brass Hollow Rods
  • Lead Free Brass Hollow Rods
  • Lead Free Brass Hollow Rods

Approx. Rs 550 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Shape: Round
  • Color: Yellow
  • Usage/Application: Industrial
  • Brand: Shree Extrusion Limited
  • Material: Brass
  • Country of Origin: Made in India

These rods are also known as Reverting Quality Brass Rod and is mainly used in blanking, riveting, bending, hot forging, watch case and belts, etc.

  • IS4413
  • IS4170
  • DTD-627
  • BS2874/86 CZ-109
  • BS2872/86 CZ-108

    Technical Specifications:


    Chemical RequirementsCuZn40CuZn35CuZn37CuZn30
    Copper59.0 - 62.0%63.0 - 68.5%62.0 - 65.0%60.5 - 71.50%
    Lead0.75% max0.05% max0.30% max.0.05% max.
    Iron0.10% max0.05% max0.10% max0.05% max
    Total Imp.0.30% max0.30% max0.60% max0.30% max
    ZincRemainderRemainderRemainderRemainder

Free Cutting Brass Rod

Free Cutting Brass Rod
  • Free Cutting Brass Rod
  • Free Cutting Brass Rod
  • Free Cutting Brass Rod

Approx. Rs 580 / Kg

  • Minimum Order Quantity: 1000 Kg
  • I Deal In: New Only
  • Brand: Shree Extrusions
  • Material: Cutting Brass
  • Country of Origin: Made in India
  • Thikness: 0.1-5.5 mm
  • Diameter: 1.0-120mm

We are one of the leading manufacturer and suppliers of  Free-Cutting Brass Rod with the using of a high quality of material. We obligated to match the industrial requirements in a certain time.

BS249, IS: 319 Gr. l & ll, IS: 8364 Gr. l & ll, BS: 2874 CZ121Pb3, CuZn39Pb3

High Tensile Brass Hollow Rods

High Tensile Brass Hollow Rods
  • High Tensile Brass Hollow Rods
  • High Tensile Brass Hollow Rods
  • High Tensile Brass Hollow Rods

Approx. Rs 580 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Shape: Round
  • Color: Yellow
  • Usage/Application: Industrial
  • Brand: Shree Extrusion Limited
  • Material: Brass
  • Country of Origin: Made in India

We are one of the leading manufacturer and suppliers of High Tensile Brass Rod with the using of a high quality of material. we obligated to meet the industrial requirements.

BS:1001, HT12472, IS:320 l & ll

C46400 Lead Free Naval Brass Rods

Approx. Rs 580 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Bar: AMS 4611, 4612, ASTM B21, FEDERAL QQ-B-639, SAE J463, J461
  • Forgings, Die: ASTM B283
  • Shapes: ASTM B21
  • Nominals: 60.0000 to 39.2000

The lead-free naval brass is the result of the composition of 60% copper, 39.2% zinc and 0.8% tin. The addition of tin with zinc results in the high corrosion resistance in sea water. This makes the alloy resistant to dezincification that inhibit the impingement by seawater at higher than normal temperatures. The alloy is also appreciated for its resistance to wear, fatigue, galling, and stress corrosion cracking.

Applications:
  • Builders Hardware: Lock Pins
  • Electrical: Precision Shipboard Equipment
  • Fasteners: Rivets, Bolts, Nuts
  • Industrial: Welding Rod, Condenser Plates, Structural Uses, Valve Stems, Balls, Heat Exchanger Tube, Aircraft Turn Buckle Barrels, Bearings, Dies, Golf Ball Production, Pressure Vessels, Bearings, Bushings, Hub Cones
  • Marine: Propeller Shafts, Marine Hardware, Decorative Fittings, Shafting, Propeller Shafts, Turn Buckles
  • Ordinance: Missile Components
  • Plumbing: Fittings: Baffle Plates And Flanges
  • Plumbing: Fittings

Technical Specifications:

SpecificationsDesignation
ISOCuZn38Sn1
EuropenCuZn39Sn1
BSCZ 133
JISC 4640
RussianL060-1

Chemical Composition:

CuFePbSnZn
Min/Max59.0 - 62.0.0.10.20.5 - 1.0Rem
Nominals60.0000--0.700039.2000

Specifications:

End ProductSpecification
BarAMS 4611, 4612, ASTM B21, FEDERAL QQ-B-639, SAE J463, J461
Bar, ForgingASTM B124
BoltsASTM F468
Forgings, DieASTM B283
NutsASTM F467
PlateFEDERAL QQ-B-639
Plate, CladASTM B432
Plate, Condenser TubeASME SB171, ASTM B171
RodAMS 4611, 4612, ASTM B21, SAE J463, J461
Rod, ForgingASTM B124
ScrewsASTM F468
ShapesASTM B21
Shapes, ForgingASTM B124
SheetFEDERAL QQ-B-639
StripFEDERAL QQ-B-639, SAE J463, J461
StudsASTM F468
Wire, MetallizingMILITARY MIL-W-6712

CW713 High Tensile Brass

CW713 High Tensile Brass

Approx. Rs 680 / Kilogram

  • Minimum Order Quantity: 250 Kilogram
  • Material Grade: CW713
  • Shape: Round
  • Usage/Application: Automotive and Hydraulic
  • Brand: SHREE EXTRUSIONS LIMITED
  • Diameter: 1 mm To 220 mm
  • Composition: As per CW713
  • Tensile Strength: 540 N mm2
  • Elongation: 12
  • Temperature: 500 to 600
  • Color: Yellow
  • Hardness: 160 HB
  • Material: Brass
  • Packaging Type: Wooden
  • Standard: CW713
  • Astm: C67400
  • Alloy Or Not: YES

CW713R is a high tensile brass which is alloyed with aluminum, manganese and silicon etc. whichmakes this alloy almost as hard as aluminum bronze, but considerably easier to process. CW713R also has good corrosion, wear resistance and machinability.

Typically this alloy is used in the automotive and hydraulic industries in forms of products such as Bearings for high load, slide-& wear-plates, valve guides, piston parts etc.
CHEMICAL COMPOSITION

 

Cu

Pb

Sn

Zn

Si

Ni

Fe

Al

Mn

Other

Min

57

0.2

-

-

0.3

-

-

1.3

1.5

-

Max

59

0.8

Max 0.4

Rem

1.3

Max 1.0

Max 1.0

2.3

3.0

Max 0.3


Additional Information:
  • Production Capacity: 300 Ton
  • Delivery Time: 3-4 Week
  • Packaging Details: Wooden

Forging Brass Rod

Forging Brass Rod

Approx. Rs 550 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Material: Brass
  • Condition: New
  • Brand: Shree Extrusions
  • Thickness: 0.1-9mm
  • Diameter: 6mm To 130 mm

We are one of the leading manufacturer and suppliers of Forging Brass Rod with the using of a high quality of material. we obligated to match the industrial standard.

BS:218, IS3488, IS:6922, BS2874 CZ122, CuZn 38Pb1, 1.5

Naval Brass Rod

Naval Brass Rod

Approx. Rs 580 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Customisation: Customised
  • Material: Brass
  • Copper: 60%
  • Brand: Shree Extrusions
  • Alloy: With Alloy
  • Condition: New
  • Thickness: 0.3-5mm
  • Diameter: 3mm~800mm

We fabricate a finest range of Naval Brass, which are renowned for their high strength, rust proof and durability features. Naval brass is a copper alloy containing 60% copper, 75% tin and around 39.25% zinc. These are made up of high-grade raw material and can be availed in the form of sheet, plate, rods and circle. Our range of naval brass is broadly used in marine and construction industry.

Riveting Brass Rod

Riveting Brass Rod

Approx. Rs 550 / Kilogram

  • Minimum Order Quantity: 1000 Kilogram
  • Rod Length: 3 Meters Up
  • Brand: Shree Extrusions
  • Material: Brass
  • Thikness: 0.2.5-8mm
  • Diameter: 6 mm to 250 mm

We are one of the leading manufacturer and suppliers of Riveting Brass Rod with the using of a high quality of material. We are able to meet the industrial norms and standards regarding requirements.

Brass Flat Bar

Brass Flat Bar

Approx. Rs 580 / Kg

  • Shape: Flat
  • Finish Type: Flat
  • Thickness: 4 mm min.
  • Diameter: 4 mm to 120 mm
  • Material Grade: Brass

We provide High Quality Brass flat Wire with Bright surface finishing and brass colour,widely uses in Zipper Industries suitable for teeth formation ,bending and punching work, top and bottom stopper.

And suitable for electronic industries for punching work.

SEL Brass Brazing Rods

SEL Brass Brazing Rods

Approx. Rs 580 / Kg

  • Minimum Order Quantity: 250 Kg
  • Pieces Per Pack: 50
  • Diameter: 0.8 mm to 10 mm
  • Shape: Round
  • Material Grade: Brass Brazing
  • Usage/Application: Industrial
  • Material: Brass
  • Packaging Type: Box
  • Type: Brass Brazing
  • Rod Length: 500 mm To 1500 mm
  • Rod Type: Brazing

Copper alloys are base metal alloys used for high-temperature brazing of steels or tungsten carbide. Cost effective alternative to silver brazing alloys wherein high joint strength can be readily achieved. Some alloys also offer excellent corrosion resistance with thermal and electrical conductivity. we offer these alloys in standard composition to the suitable specific application available in wires and rods.

GermanyDINEurope ENInter.StandardOrg.ISOAws
Din:8513En104417672(2010-11)A5.8.89
Technical Specifications:

Chemical CompositionL-CuZn40Mn2
Copper6060
Zinc39.739.7
Silicon0.30.3
Mn-0.2

Additional Information:
  • Delivery Time: 3-4 Weeks
  • Packaging Details: 50 Pcs or as per requirement

Flat Brass Rod

Flat Brass Rod

Approx. Rs 580 / Kg

  • Minimum Order Quantity: 1000 Kg
  • Material: Brass
  • Rod Length: 3 Meters Up
  • Brand: Shree Extrusions
  • Condition: New
  • Thickness: 0.2-6mm

We are one of the leading manufacturer and suppliers of Flats Brass Rod with the using of a high quality of material. We obligated to meet the industry standards.

BS249, IS: 319 Gr. l & ll, IS: 8364 Gr. l & ll, BS: 2874 CZ121Pb3, CuZn39Pb3

C22000 Red Brass Rod 90/10

C22000 Red Brass Rod 90/10

Approx. Rs 800 / Kg

  • Size: ANY
  • Material Grade: C22000 Red Brass Rod 90/10
  • Shape: Round
  • Type: C22000 Red Brass Rod 90/10
  • Diameter: AS PER CUSTOMER REQUIREMENT
  • Material: C22000 Red Brass Rod 90/10

Equivalent Specifications:
SPECIFICATIONSDESIGNATION
ENCuZn10
DINCW501L
UNSC22000
BSCZ101


CuZn10 has very good cold forming properties and is well suited for e.g. coinage, beating, embossing. This alloy has a higher strength as pure copper. It has good welding and brazing properties as well as a good corrosion resistant and is not fragile to stress corrosion and dezincification. CuZn10 is principally used in jewelry, metal goods, and watch industry and in electronic industry for installation parts. We produce qualities with grain sizes below 5 mm if needed.

Typical Uses :
Architecture: Weather Stripping, Screen Cloth, Ornamental Trim, Etching Bronze, Grill Work. Builders Hardware: Kick Plates, Hardware. Consumer: Housing for Lipstick Compacts, Costume Jewelry, Caskets, Ball Point Pens. Electrical: Wave Guides, Rotor Bar-AC Motors, Cable Warp. Fasteners: Screw Shells, Bolts, Line Clamps, Rivets. Industrial: Base for Vitreous Enamel, Escutcheons, Flexible Tube, Studs. Marine: Marine Hardware. Ordnance: Small Arms Cartridges, Artillery Projectile Rotating Bands, Press Fit, Primer Caps. Plumbing: Plumbers Brass Goods Typical Applications: Jewelry and metal good, Components for the electrical industry, Lead frames.

Chemical Composition:
 CuPbFeZn
Min/Max89.0-91.00.050.05Rem
Nominal90.0--10.0


Physical Properties:
Density0.318 lb/in3 at 68 F
Electrical Conductivity44 %IACS @ 68 F
Thermal Conductivity109 Btu • ft/(hr • ft2•oF)at 68F


Mechanical Properties:
TemperTensile Strength Rm [Ksi] [MPa]Yield Strength Rp0.2 Nominal [Ksi] [MPa]Elon Gation 2” Nominal [%]Hardness Nominal R30T HVMin Bend Ratio 90°Min Bend Ratio 180°
GWBWGWBW
Soft36-42
248-290
12
83
470000
H0247-57
324-393
47
324
1257001.01.0
H0457-66
393-455
58
400
46601.01.53.0
H0664-72
441-497
63
435
4681.02.01.5
H0664-72
441-497
63
435
4681.02.01.5
H0869-77
476-531
68
469
1691.52.0
H1072-80
497-552
70
483
1701.53.0


Sizes Available:
ROUND RODS/BARS1 mm To 100 mm
HEX5 mm To 60mm
SQUARE5 mm To 60mm


X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Brass Brazing Rod ?

    country-ico

    We will contact you soon !

    Pratik Kabra

    (CEO)

    Shree Extrusions Limited

    Jamnagar, Gujarat, India

    More Categories

    View All Categories »
    Send SMS
    Get Callback