The Manganese Bronze C66800 alloy possess good hot and cold workability and forging ability. It is fabricated using the process of bending, coining, rawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:

• Industrial: Gears, Sealing Rings, Thrust Bearings, Bushings, Cams, Spindles, Bearings, Idler Pins, Connecting Rods, Drive Shafts, Valve Seats, Sleeve Bearings, Piston Heads.
• Marine: Pump Parts, Hardware, High Strength

Technical Specifications:


Chemical Composition:


Physical Properties:

Alloy C67500 Manganese Bronze is a wrought alloy with additions of iron, tin and manganese to increase the strength and corrosion resistance. It can be worked to increase the strength and can be available in the half hard and fully hard condition. It possesses hot working properties and can be die forged into valves, connectors and other components for military applications. It can also be hot-headed or upset forged for manufacturing fasteners.

Typical Uses:

• Automotive: Clutch Disks, Shafting, Pump Rods
• Fasteners: bolts
• Industrial: Valve Bodies, Balls, Valve Stems, Bushings, Aircraft Parts
• Marine: hardware

Chemical Composition:


Specifications:


Fabrication:

The C67300 Manganese Bronze is high in strength alloy with good bearing qualities. The alloy maintains high impact resistance with good machinability by making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. It also resists squashing out under high loads and extreme wear applications.

Typical Uses:

• Fasteners: Fasteners, Lead Screw Nuts
• Industrial: Gears and Cams, Wear Plates, Bushings, Seal Rings, Idler Pins, Piston Heads, Brearing Pins, Thrust Bearings, Sleeve Bearings, Propeller Shafts, Shaft Bushings, Clutch Bearings, Drive Shafts, Spindles, Pump Parts, Bearings
• Marine: Hardware, Valve Seats
• Other: Connecting Rods

Technical Specifications:


Chemical Composition:


Specifications:


Fabrication:


Physical Properties:

The Manganese Bronze Rod C66800 comes under the category of naval brass and is composed of 60% copper, 39.2% zinc and 0.8% tin. In compliance with typical naval brass, the alloy possesses good strength as well as rigidity. The corrosion resistance towards sea water is achieved due to the presence of zinc in place of tin. The addition of tin also makes the alloy resistant towards dezincification, fatigue, galling, and stress corrosion cracking.

Applications :

• Gears
• Sealing Rings
• Thrust Bearings
• Bushings
• Cams
• Spindles
• Bearings
• Idler Pins
• Connecting Rods
• Drive Shafts
• Valve Seats
• Sleeve Bearings
• Piston Heads

Equivelent Specifications:

Chemical Composition:

Sizes Available:

The Manganese bronze copper casting alloy UNS C86200 consists primarily of copper, zinc, aluminium and manganese bronze. Manganese existing in UNS C86200 provides an attractive chocolate brown colour which is commonly used in architecture. The presence of lead in the alloy improves the longevity of the alloy.

Typical Uses:

• Builders: Hardware Brackets, Structural Parts
• Fasteners: Screw Down Nuts
• Industrial: Struts, Gears, Valve Stems, Bushings, Cams, Wear Rings for Pressing Dies for Wood Pulp Industry, High Strength Machine Parts, Hooks, Frames, Shafts, Marine Racing Propellers, Worm Gears, Pressing Dies for Wood Pulp
• Marine: Rudders, Marine Castings, Boat Parts, Clamps

Technical Specification:


Chemical Composition:


Physical Properties:

The Manganese BronzeC67400alloy is manufactured using the process of bending, drawing, upsetting, and many other processes. The alloy is excellent on hot and cold workability and forges ability.

Typical Uses:

• Industrial: Bushings, Shafts, Cams, Chain Guides, Wear Plates, Gears, Food Conveyor Chain
• Other: Connecting Rods

Technical Specifications:


Chemical Composition:


Specifications:


Fabrication:


Physical Properties:

The C67000 Manganese Bronze B is high in strength alloy that possesses hot and cold workability with good forging ability. The alloy is manufactured using the process of bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:

• Industrial: Forgings, Corrosion Resistance, Wearability , Fatigue Resistance , High Strength .

Technical Specifications:


Physical Properties:

The C67000 Manganese Bronze B is high in strength alloy that possesses hot and cold workability with good forging ability. The alloy is manufactured using the process of bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:

• Industrial: Forgings, Corrosion Resistance, Wearability , Fatigue Resistance , High Strength .

Technical Specifications:


Physical Properties:

The Manganese bronze copper casting alloy UNS C86200 consists primarily of copper, zinc, aluminium and manganese bronze. Manganese existing in UNS C86200 provides an attractive chocolate brown colour which is commonly used in architecture. The presence of lead in the alloy improves the longevity of the alloy.

Typical Uses:

• Builders: Hardware Brackets, Structural Parts
• Fasteners: Screw Down Nuts
• Industrial: Struts, Gears, Valve Stems, Bushings, Cams, Wear Rings for Pressing Dies for Wood Pulp Industry, High Strength Machine Parts, Hooks, Frames, Shafts, Marine Racing Propellers, Worm Gears, Pressing Dies for Wood Pulp
• Marine: Rudders, Marine Castings, Boat Parts, Clamps

Technical Specification:


Chemical Composition:


Physical Properties:

The C67300 Manganese Bronze is high in strength alloy with good bearing qualities. The alloy maintains high impact resistance with good machinability by making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. It also resists squashing out under high loads and extreme wear applications.

Typical Uses:

• Fasteners: Fasteners, Lead Screw Nuts
• Industrial: Gears and Cams, Wear Plates, Bushings, Seal Rings, Idler Pins, Piston Heads, Brearing Pins, Thrust Bearings, Sleeve Bearings, Propeller Shafts, Shaft Bushings, Clutch Bearings, Drive Shafts, Spindles, Pump Parts, Bearings
• Marine: Hardware, Valve Seats
• Other: Connecting Rods

Technical Specifications:


Chemical Composition:


Specifications:


Fabrication:


Physical Properties:

The Manganese BronzeC67400alloy is manufactured using the process of bending, drawing, upsetting, and many other processes. The alloy is excellent on hot and cold workability and forges ability.

Typical Uses:

• Industrial: Bushings, Shafts, Cams, Chain Guides, Wear Plates, Gears, Food Conveyor Chain
• Other: Connecting Rods

Technical Specifications:


Chemical Composition:


Specifications:


Fabrication:


Physical Properties:

The Manganese Bronze Rod C66800 comes under the category of naval brass and is composed of 60% copper, 39.2% zinc and 0.8% tin. In compliance with typical naval brass, the alloy possesses good strength as well as rigidity. The corrosion resistance towards sea water is achieved due to the presence of zinc in place of tin. The addition of tin also makes the alloy resistant towards dezincification, fatigue, galling, and stress corrosion cracking.

Applications:

• Gears
• Sealing Rings
• Thrust Bearings
• Bushings
• Cams
• Spindles
• Bearings
• Idler Pins
• Connecting Rods
• Drive Shafts
• Valve Seats
• Sleeve Bearings
• Piston Heads

Equivalent Specifications:


Chemical Composition:


Sizes Available:

Alloy C67500 Manganese Bronze is a wrought alloy with additions of iron, tin and manganese to increase the strength and corrosion resistance. It can be worked to increase the strength and can be available in the half hard and fully hard condition. It possesses hot working properties and can be die forged into valves, connectors and other components for military applications. It can also be hot-headed or upset forged for manufacturing fasteners.

Typical Uses:

• Automotive: Clutch Disks, Shafting, Pump Rods
• Fasteners: bolts
• Industrial: Valve Bodies, Balls, Valve Stems, Bushings, Aircraft Parts
• Marine: hardware

Chemical Composition:


Specifications:


Fabrication:

The Manganese Bronze C66800 alloy possess good hot and cold workability and forging ability. It is fabricated using the process of bending, coining, rawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses:

• Industrial: Gears, Sealing Rings, Thrust Bearings, Bushings, Cams, Spindles, Bearings, Idler Pins, Connecting Rods, Drive Shafts, Valve Seats, Sleeve Bearings, Piston Heads.
• Marine: Pump Parts, Hardware, High Strength

Technical Specifications:


Chemical Composition:


Physical Properties: